Includes four removable grid plates An optional configuration with slats is also available Grid Plate Work Surface The grids are fabricated of 18-gauge, type 304 stainless steel with a #4 finish Each grid plate has two 11-gauge stainless steel stand-offs to provide fluid drainage Tabletop Fabricated of 14-gauge, type 304 stainless steel with a #4 finish and constructed with full 1 in. (2.54cm) radius corners for easy cleaning and sanitation All edges are flanged around the full perimeter along with a welded-in 14-gauge “U”-formed channel and angled cross supports, providing maximum strength and durability Acoustic Coating Acoustic coating is applied to the underside to deaden sound and prevent condensation The coating is then sealed with silver enamel paint Welding All welds utilize only stainless steel as a filler medium All visible welds are ground smooth and regrained to match the #4 finish Plumbing All external plumbing parts are brass with a heavy chrome plating finish Vacuum Breaker Vacuum breakers protect the potable water supply Sink A large single-compartment sink is provided on the end of table with either a lever-handle drain or a disposal Faucet Located at the end of the table, a hot/cold faucet is supplied with a swivel spout, built-in vacuum breaker, and wrist-blade handles Built-In Table Rinse Built-in continuous flow table rinse with 10 spray nozzles is supplied complete with vacuum breaker and flow control valve Hydro-aspirator Deluxe hydro-aspirator with reverse flow is supplied complete with control valve, vacuum breaker, air gap, and plastic tubing