Leg Support Item # 120 - With Standard Cover Item # 120C - Replacement Standard Cover Only Item # 120HS - Heat Sealed When the legs are correctly in position, the weight is spread between the legs and the feet, with no pressure on the heels. Possibly some patients with large, heavy legs, could have a slight pressure on the heels, although by adjusting the position of the Leg Support, this pressure may be prevented. The Leg Support has a series of ridges to provide a soft convoluted surface for the calves to rest. Foot-drop may be prevented by resting the feet on the flat front foot-rest, and as the Leg Support is made from foam, the patient can press against the foot-rest section and the flexibility of the foam will prevent the patient’s feet from feeling ‘trapped’ as if in a solid piece of furniture. Some patients may benefit by exercising their feet on the foot-rest. When in use, please note that the Leg Support can be tilted up a bit, to provide alternative pressure points on the leg. During the course of a day, a patient may like the support altered from the normal position to a variety of different angles. Some oedema patients may need extra height for resting their legs, and use the support upside-down, thus losing the advantage of the leg and feet supports. With some badly contracted patients, it may be better to use the support back to front but this can only be determined after observation of the patient’s posture by nursing staff.