Laboratory heating control unit MC810B Electrothermal

Laboratory heating control unit MC810B Electrothermal
MC810B


The MC810B Digital Heating Controller provides a convenient means of temperature control, using microprocessor techniques to give ease of operation and good accuracy. It can be used in 3 ways: In On/Off mode with the hysteresis loop controlling power switching As a PID (Proportional, Integrated, Derivative) controller As a temperature measuring device up to 270°C or more, depending upon the probe accessory used. The MC810B Digital Heating Controller may be used in conjunction with a suitable heating or cooling device, e.g. Electromantle or Electric Bunsen. For clear operation, the MC810B Digital Heating Controller has an On/Off power switch, "Power On" amber neon indicator and an Exit/Standby button. Programming is done via the Up/Down controls on the front panel and the 3 digit LED display allows you to set a 1°C resolution over a range of -10°C to 800°C. Temperature sensing is performed by a plug-in PTFE covered platinum resistance thermometer probe which is suitable for measurements up to 270°C. There is a 5 pin DIN socket for the temperature probe. The sample temperature is displayed on the 3-digit LED display. The MC810B Digital Heating Controller has a zinc die-cast outer case and is suitable for bench and retort stand mounting or wall mounting, using the wall bracket and retort rod clamps provided. It has a short mains output lead with an IEC socket to connect it to the resistive load. An accessory mains lead is available where remote operation is required, e.g. in a fume extraction unit.
  • Application:for laboratory heating
******
Beacon Road,
Stone, Staffordshire
ST15 OSA
United Kingdom
× × × × × × × × × ×

More products from this supplier




Endorsed Companies