2-sections stretcher with adjustable height main frame made of rectangular steel tube 40x30 mm, provided with multifunctional polished cast aluminium joints for side rails and with multifunctional nylon joints at 4 corners for push bar frame, fixed height I.V. rod art. 2489/CAF (optional, not included) and monitor support art. 2489/CPM (optional, not included); provided with full lenght and width soft PVC bumpers, unremovable. Section frame made of semi-oval steel tube 40x20 mm. Mattress platform composed of 2 removable steel welded meshes Ø 5 mm and Ø 6 mm, locked on special nylon parts, dimensions cm 190x60. Side rails frame made of round anodized aluminium tube Ø 30 mm and Ø 22 mm; provided with nylon parts with exclusive ergonomic design and with 3-positions handle, for easy and safe handling; easy to unlock and lower by rotation device. Push bar frame made of round anodized aluminium tube Ø 30 mm and Ø 22 mm. Support frame made of semi-oval 50x40 mm and round Ø 32 mm steel tubes. 4 castors Ø 200 mm, controlled by a 3-positions foot lever for very easy patient trolley movement: 3 swivelling and 1 steering, 4 swivelling, 4 braked. Steel coating RAL 1013 ivory epoxy powder (average coating 90 micron, 200°) by industrial robot. Prearranged to hold optional wire basket art. 2489/CPO (optional, not included), gas cylinder holder art. 2489/CPB (optional, not included) or gas cylinder holder with wire basket art. 2489/PB-PO (optional, not included).