Specifications and features *Power supply through included mains cable (without plug). *Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting. *Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details"). *The distillate storage tank accepts twice the hourly capacity of the still. *Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn. *Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow. *Thermostatic low water cut-off. *Economical energy consumption by distillation of the heated cooling water. *Water saving through automatic water cut-off. Unnecessary water consumption will be avoided. *Evaporator easily accessible for cleaning purposes . *Condenser (cooling coil) inside the storage tank, easily exchangeable. *Distillate withdrawal through drain cock with continuous and touch position. *CO2 degassing through outlet in the condenser. *Heating element, evaporator, storage tank and condenser made of stainless steel. *Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. *Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm). *Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm). *Hoses for water in- and outlet are available as accessory.
- Distillation type:single