Specifications 100% ergonomic for right and left handed users • Electronic Instrument Unit controlled by microprocessor. • Electric chair with adjustable, reclining and Trendelenburg positions, and 5 preset memories (three for working, reset and return to cuspidor). • Electronic footswitch, multifunction and proportional with water selection, micro motor direction inverter, “chip blower” drive and chair movement. • The equipment performs an automatic self-test when turned on “Check Control”. • Instrument programming via digital support. • Programming of the speed of micro motor, ultrasonic scaler strength and intensity of light to the instruments. • Selection of two micro-motor speed ranges from 0 to 4.000 (Selective) and from 0 to 40.000 (Global). • Display with real working speed of the micro-motor from 800 to 40.000 rpm. • Programming of ultrasonic scaler in work mode: scaling, perio and endo. • Graphic display of the ultrasonic strength Level and the real working speed of the turbine. • System for the detection and monitoring of visualisation warnings on the display. • Possibility of having turbine and the micro motor change places using a single compatible hose. • Pre-installation of lamp self-activation on leaving the idle position and return to cuspidor. • Separate regulation of the spray and water wealth for every instrument. • On/off switch of water and air supply into the unit. • Choice of working language. • “Update device” system: it incorporates the last updates of programming even some years after its acquisition.