E-101 Push Button Emergency Station Description: E-101 Push Button Emergency Station features a satin finish stainless steel faceplate with silk-screened designations. Stations can be used on single or dual status systems. They may be flush mounted on a standard outlet box with single gang rings, or surface mounted on Wiremold 5748 or equal with a depth requirement of 1 ¾ . Incandescent lamps not acceptable. Field wiring terminations are with screw terminals for maximum 16-gauge wire. Operation: A touch of the push button type switch on the E-101 Emergency station activated a call for help, verified by a red LED indicator. Calls can be cancelled by pushing the button again. E-103/E-113 Push Button Emergency Station Description: E-103/E-113 stations feature satin finish stainless steel faceplates with silk-screened designations. They may be flush mounted on Wiremold 5748 or equal, with a depth requirement of 1 ¾. E-103: May be used with dual status systems. Field wiring terminations are with screw terminals for maximum 16-guage wire. E-113: For single status only. Wire lead terminations. Operation: A touch of the DPDT switch button on the UL listed E-103/E-113 Emergency Station initiates an emergency call, verified by mechanical flag drop. Calls may by cancelled by pushing the button again. E-101 & E-103/E-113 Emergency Stations Mounting: The satin finish stainless steel faceplate with silk-screened designations may be flush mounted on a standard outlet box with single-gang plaster ring, or surface mounted on a Wiremold 5748 or equivalent.